|
|
Friable asbestos material is any material that contains asbestos and is in the form of a powder, or can be crumbled, pulverized or reduced to powder by hand pressure when dry. Examples of friable asbestos include:
• sprayed limpet
• asbestos cloth and rope
• millboard
• pipe lagging
• boiler lagging.
Any asbestos cement products that have been subjected to [...]
Bonded asbestos material is any material that contains asbestos in a bonded matrix. It may consist of Portland cement or various resins/binders, and it cannot be crushed by hand when dry. Asbestos cement (AC) products and electrical meter boards in good condition are examples of bonded asbestos material.
A large number of products made from bonded [...]
Asbestos is the generic term for a number of fibrous silicate minerals. There are two major groups of asbestos:
• the serpentine group contains chrysotile, commonly known as white asbestos
• the amphibole group contains amosite (brown asbestos) and crocidolite (blue asbestos), as well as some other less common types, such as tremolite, actinolite and anthophyllite.
Since 31 [...]
Under the UPSS Regulation, ‘decommission’ means to permanently abandon the use of a system or render it permanently unusable. It is industry best practice to remove UPSS that are no longer required. Where two years have elapsed since fuel was put in or taken from a tank, it must be abandoned (after removing the fuel) [...]
Removal of the tank is the preferred option for dealing with disused or unwanted UPSS as it allows for a more thorough investigation and assessment of any contamination remaining at the site. Tank removal and remediation of any residual contamination decreases environmental and OH&S risks at UPSS sites, which reduces the liability of the person [...]
Following is provided as a guide, it is not possible to recommend sampling methods for all waste types. Appropriate sampling depends on how consistent any tested property is throughout a batch of waste. It is the waste generator’s responsibility to ensure that the sampling and analytical methods used are appropriate for the contaminants they are [...]
The following wastes have been pre-classified as ‘general solid waste (non-putrescible):
• glass, plastic, rubber, plasterboard, ceramics, bricks, concrete or metal
• paper or cardboard
• household waste from municipal clean-up that does not contain food waste
• waste collected by, or on behalf of, local councils from street sweepings
• grit, sediment, litter and gross pollutants collected in, and [...]
Liquid waste means any waste that:
• has an angle of repose of less than 5 degrees above horizontal, or
• becomes free-flowing at or below 60 degrees Celsius or when it is transported, or
• is generally not capable of being picked up by a spade or shovel.
The EPA may classify additional wastes as liquid waste from [...]
‘Special waste’ is a class of waste that has unique regulatory requirements. The potential environmental impacts of special waste need to be managed to minimise the risk of harm to the environment and human health.
Special waste means any of the following:
• clinical and related waste
• asbestos waste
• waste tyres.
Generators of special waste (except asbestos mixed [...]
The following principles must be applied at all times when using the step-by-step waste classification process.
• Where practicable, it is desirable to separate a mixture of wastes before classifying them separately. For example, if waste tyres (special waste) are mixed with lead-acid batteries (hazardous waste), it would be desirable to separate the wastes so only [...]
|
|
|